©2010 RED.COM, INC. DECEMBER 28, 2010 8 8 5. Tighten to specification in a diagonal order. Tighten Allen Screws to 4 in lbs (0.45 N.m) 6.
DECEMBER 28, 2010 ©2010 RED.COM, INC. 9 INSTALLATION VERIFICATION PROCEDURE Verify proper operation of the RED ONE 1.8” SSD Module by performing
THIS PAGE INTENTIONALLY BLANK
DECEMBER 28, 2010 ©2010 RED.COM, INC. 1 TABLE OF CONTENTS DISCLAIMER ...
©2010 RED.COM, INC. DECEMBER 28, 2010 2 2 DISCLAIMER RED® has made every effort to provide clear and accurate information in these Installation
DECEMBER 28, 2010 ©2010 RED.COM, INC. 3 JAPAN STATEMENTS EUROPEAN UNION COMPLIANCE STATEMENTS Red declares that the equipment described in this
©2010 RED.COM, INC. DECEMBER 28, 2010 4 4 BEFORE YOU START READ FIRST RED® is providing the following installation instructions as a special se
DECEMBER 28, 2010 ©2010 RED.COM, INC. 5 REMOVING CF MODULE 1. Place the RED ONE camera body on its side (connector side down) on the protected s
©2010 RED.COM, INC. DECEMBER 28, 2010 6 6 3. Gently rotate the CF Module to allow access to the two (2) connectors. 4. Disconnect the Serial
DECEMBER 28, 2010 ©2010 RED.COM, INC. 7 INSTALLING RED ONE 1.8” SSD MODULE 1. Carefully connect the Serial ATA and e-SATA connectors to the RED
Comments to this Manuals