Red FOCUS User Manual download pdf (Page 10)

OPERATION

This section describes powering up/down and basic controls of RED Focus and how to initiate a project.

POWER UP / DOWN

POWER UP

To power up RED Focus, press the Power button located at the front.

• The Power LED will illuminate Green indicating RED Focus is on and ready.

• The image displayed by RED Focus will be visible when installed on a cameras PL mount with the

camera powered up.

POWER DOWN

After 3 minutes, RED Focus will automatically power down. RED Focus cannot be powered down by

pressing or holding down the Red button.

NOTE: To manually power down RED Focus off, the batteries must be removed. Refer to GETTING

STARTED > BATTERY INSTALLATION / REPLACEMENT.

CAMERA BACKFOCUS ADJUSTMENT

RED ONE

1. Place the camera on a level, stable surface or mount the camera on a tripod.

2. Using a 5/32” Allen wrench, loosen the two (2) focus ring bolts.

Loosening RED ONE Focus Ring Bolts

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

No comments

Red FOCUS User Manual Page 10